Select Portable Infrared Panel Heater
Operations available on the SmartLife App
From the main screen of the Smartlife app, you can access the following management features for the heater,
which are described more fully on the following page:
- Power On / Off (turns the heater on and off)
- Temperature override (Orange circle with + and
–
buttons)
- Manual Operation
-
“Smart”
Operation (Program Mode)
- Holiday Mode
- Settings
- Timer
Changing Network / disabling Wifi
You can move the heater to a new network if you need to. You will have to
–
repair with the SmartLife app.
You can also de-activate and re-activate Wifi and revert to simple on/off mains power control. Long press the
‘
-
’
button on the receiver for 10 seconds to de-activate (blue Wifi LED goes out) and re-activate wifi (blue LED
comes back on).
Tap ‘+’ top right of App
Select “Small Home Appliances”
and then “Thermostats”
If
this
is
your
first
thermostat
you
are
adding you will be asked
to
enter
your
Wifi
password.
You will not have to do
this
when
you
add
subsequent thermostats
to the App.
Activate
the
Power
switch on the heater,
check the power signal
light is on. The Wi-Fi
pairing indicator will
start to flash rapidly.
Follow the instructions
on the App to pair.
If you failed to pair, click
“Retry”
in SmartLife App. Long press the
“M”
button (5) on the control box to reset the
pairing mode of the heater, following the directions in the SmartLife App.
In situations where several wifi connections are available and the heater fails to find the right router connection, we
recommend you try the Alternative Pairing mode offered by the SmartLife app. This is an option offered by the App
if normal pairing mode fails.
More detailed help is available online via the Help & Support section of your local Herschel Website.
Pairing
