1.
To illuminate the star, please only use our recommended
accessories (lamp / cable) provided with the star and one of
the recommended power sources (for 6,3V)
2.
Never plug the ends of the cabling directly into a wall socket!
3.
The screw heads of the plugs should not touch each other.
4.
Make sure that lamp and socket are well and straight fixed
into the cap. The lamp needs to be fitted in the middle of
the body.
5.
The Herrnhut star and the lighting kit is for decoration
only and is not suitable as a toy for children.
The sharp
points may cause injury. Please handle with care.
6.
The star assembly kit, model A1b might be assembled
under adult supervision and by children 7 years and older.
Attention, electric device. Do not operate without supervision!
1.
Place the bulb into the opening of the star and fasten the
cap firmly onto the neck of the star.
5.) Operating- and safety instructions
3.) Assembly instructions
2.
Now you can hang up the star with the use of the cable.
1.
Start with sticking the two halves of the body base together.
Please apply the glue slightly. Remove all remains of glue on
the splice.
3.
Now stick the remaining points onto the appropriate
elevated sections of the body base.
Single star A1e:
DIY-kit A1b:
2.
Now fix the single points onto the appropriate sections
of the body. Start with 7 square points and stick them
along the seam of the body.
4.
Please consider the colour
scheme of bicoloured stars
according to this picture.
Please apply the glue slightly!
© Herrnhuter Sterne GmbH, Subject to change 10/2019 Moravian Star
Herrnhuter Sterne GmbH
Oderwitzer Straße 8 . 02747 Herrnhut
Tel. +49-35873 3640 . Fax +49-35873 36435
4.) Basic notes on the lighting kit
For lighting-up the star, please connect the plugs of the ligh-
ting kit with the sockets of the power source.
(see accessories, available separately)
If the LED does not light up:
Please swap the connection
pins of the lighting kit and
the power supply unit.
1.) Your product
Model:
A1e or A1b
Size:
Ø 13 cm (5,1 inches)
Colours:
yellow, white, red, yellow/red, white/red, green,
blue, green/white, blue/white, special edition
Material:
plastic (type A), for indoor use
Assembly Instructions
Herrnhut Stars A1e and A1b
Dear customer,
we would like to thank you for choosing this product
from our manufacture. We hope you enjoy your star and
have many enjoyable and uplifting moments with it.
The Herrnhut Star Company
2.) Product contents
• 2 halves of the body base
• 17 square points
• 8 triangular points
• 1 tube of glue
• 1 single star, made of plastic
• 1 lighting kit:
- 1 lamp LED, E10, 6.3 V
- cover cap in colour of the star
- cable with plugs, lenght 3m
Model A1b (DIY-kit, self-assembly):
17 x
8 x
1 x
1 x
1 x
1 x
2 x
Model A1e (single star, assembled):
• 1 lighting kit:
- 1 lamp LED, E10, 6.3 V
- cover cap in colour of the star
- cable with plugs, length 3m
Tip:
For better stability and handling during further
assembly, you can attach the cap of the lighting on the
neck of the body. (Do not glue the cap!)
As power source we recommend following products:
- Power supply 500 mA: for 1 to 3 stars with LED
- Power supply 1000 mA: for up to 5 stars with LED
- Batterie holder: for 1 star with LED
- USB Adapter: for 1 to 4 stars with LED
