background image

Additional Items Required ( Not Included in Kit)

Note: These are parts that we have used and are familiar with.  There are many other brands available and you may substitute other items that you are more 
comfortable with or have on hand.

Qty.  . . . . . . . . . .Name  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Description

1  . . . . . . . . . . . .Engine  . . . . . . . . . . . . . . . . . . . . . . . . . . . .Norvel Big Mig .049 or Norvel Big Mig .061
3  . . . . . . . . . . . .Hinges  . . . . . . . . . . . . . . . . . . . . . . . . . . . .Sig Easy Hinges # SH-710  or Du-Bro # Kwik Hinge # 537
1  . . . . . . . . . . . .Motor Mount  . . . . . . . . . . . . . . . . . . . . . . .Dave Brown # 0506
4  . . . . . . . . . . . .Motor Mount Screws and Blind Nuts  . . . . .4-40 x 3/4” Machine Screws and Blind Nuts  Sig # SH-111 or Du-Bro # 129
1  . . . . . . . . . . . .Servo Mount Tape . . . . . . . . . . . . . . . . . . . .Sig SH-119 or Du-Bro # 634
1  . . . . . . . . . . . .Throttle Pushrod Assembly  . . . . . . . . . . . . .Sig # SH-559 or Du-Bro # 165 ( if using throttle control)
1  . . . . . . . . . . . .Fuel Tank  . . . . . . . . . . . . . . . . . . . . . . . . . .Sullivan 1oz. # SS-1 or 2oz. # SS-2
1  . . . . . . . . . . . .1/2-A Fuel Line  . . . . . . . . . . . . . . . . . . . . .Sig # SH-288 or Du-Bro # 221
2  . . . . . . . . . . . .Servo Connectors  . . . . . . . . . . . . . . . . . . . .Sig # SH-736 or Du-Bro  # 121 ( 3 Reqd. if using Throttle)
1  . . . . . . . . . . . .White Covering Material . . . . . . . . . . . . . . .1 Roll Top Flite Monokote, Jet White # TOPQ0204
1  . . . . . . . . . . . .Red Covering Material  . . . . . . . . . . . . . . . .1 Roll Top Flite Monokote, Missile Red # TOPQ0201
1  . . . . . . . . . . . .Propeller  . . . . . . . . . . . . . . . . . . . . . . . . . . .Grish Tornado 6-3 Nylon Propeller # GRIQ1050
8  . . . . . . . . . . . .Rubber Bands (wing & float attach)  . . . . . .Sig # SH-340
1  . . . . . . . . . . . .Switch Mount  . . . . . . . . . . . . . . . . . . . . . . .Du-Bro # 203

Page 3

Summary of Contents for AQUA STAR HRR502










Reviews: