Thank you for using our PoE Switch products, please read this manual carefully before use.
POE
RT812 series
RT811 series
RT412 series
Quick Operation Guide
Power over Ethernet Switch
Network
Switch
Power Over
Ethernet
Transmission
Distance
Transmission
Medium
WAN1/WAN2 port: 100m
WAN: 100m
Extend switch is default OFF
state（1~4 port）：100m
Extend switch is ON
state:(1~4 port:): 250m
Cat5/5e/6 standard network cable
Network
Standard
Maximum
Frame Size
MAC address list
Backplane
bandwidth
PoE
Standard
IEEE802.3/10BASE-T
IEEE802.3u/100BASE-TX
IEEE802.3x Flow Control, IEEE802.3az
IEEE802.3x Flow Control
IEEE802.3af
1536 Bytes
2K
1Gbps
IEEE802.3af/at
PoE Power
Supply Type
End-Span(4/5+;7/8-)
IEEE802.3af
PoE Power
Consumption
af,at Adaptive (every port)
LED Status
Indicator
Environmental
Mechanical
Stability
PoE Ethernet
Working
temperature
Storage
temperature
Working
humidity
Storage
humidity
0℃~55℃
-40℃~70℃
10%-90% non-condensing
5%-95% non-condensing
200*118*40
197*73.5*29
Dimension
(L x W x H)
mm
132*66*32
Material
Color
MTBF
SECC
Dark grey
>30000h
When the PoE is powered, 1-8 LEDs are green
When the PoE power supply
is used, 1-4 LEDs are green
When accessing Ethernet, ports 1-8 are yellow
1-4 ports are yellow when
Ethernet is connected
Installation Precautions
①
Connect one end of the network cable to the switch port and the other end to a
computer or other network device.
Note: Please connect all the computers or network devices to be connected to the
switch before connecting the power adapter.
②
Connect the supplied power cord and adapter. Connect the other end of the
adapter to the switch and plug it into an external AC power outlet.
③
Power on the device connected to the switch. The corresponding indicator will light
up. The installation is complete.
Please install it in a well-ventilated room. Do not block the vents of the equipment.
Do not place and install the switch in direct sunlight or near a heating device.
Allow enough space (more than 10cm) to allow the device to dissipate heat properly.
Do not install the device in a place exposed to moisture, dust, or soot.
Please keep the equipment horizontally installed or installed in a stable place, and
take care to prevent the product from falling.
Do not place heavy objects on the device.
Do not dribble or spill liquid on the device, and ensure that no liquid filled items
can be placed on the device to prevent liquid from flowing into the device.
The interface cables of the device must be routed indoors and outdoors cables
must not be routed to prevent overvoltage and overcurrent caused by lightning.
Please use the power adapter supplied with the product. Do not use other
non-supported products. The grid voltage must meet the input voltage range of
the dedicated power adapter.
Do not disassemble the device at will.
Please transport, use and store the equipment within the allowable humidity and
temperature range.
To ensure the normal operation and service life of the switch, observe the following
precautions.
Specifications
Item
RT812 Series description
RT811 Series description
RT412 Series description
Power
Power Adapter
Voltage
Overload protection
Input：110-240V/AC 50-60Hz 5
Output：48V-52V/DC
100W
60W
Protection level
Mould：+-4KV
Differential mode：+-1KV
Network Port
Network Port
Network
Connector
Transmission
Distance
1~8 port: :10/100Mbps PoE Ethernet LAN port.
1~4 口 :10/100Mbps PoE
Ethernet LAN port.
WAN1/WAN2 port :
10/100/1000Mbps
Ethernet WAN port
WAN port:
10/100Mbps
Ethernet WAN port
WANport:10/100Mbps
Ethernet WAN port
1~8 口: 100m
1~8 口: 100m
1~4 口: 100m
Connection cable
4
5
Related tools and documents of products, please download from www.herospeed.net.
