Products Appearance Description
Ethenet、 Audio Output、Audio Input、VGA、HD、USB、DC12V
PLC NVR Kits Quick Installation Guide
PLC（Power Line Communication）,it is the network signal coupled to the power transmission line,no
need cable,Plug and play,no need any setting,easy installation.
Step1: Installation Preparation
Install HDD. Make sure all the power are cut before intalling.
Installation tool: Cross screwdriver. (
Notes: Please use professional hard disk recommended by supplier.
)
Notes: Images for instruction use only, the final goods are subjected to the real object.
Notes: Images for instruction use only, the final goods are subjected to the real object.
1. Loosen the screws on the base plate and remove
the upper cover.
2. Align the screw holes on the hard disk with the screw
holes on the base plate and tighten the hard disk to the
bottom with screws.
3. Plug in the hard drive cable and power cable.
USB
HD Port
VGA
Audio Input
Audio Input
Audio Output
Audio Output
Ethenet
Ethenet
USB
DC 12V
DC 12V
VGA
HD Port
4. Align the cover against the base and gently close it.
Tighten the top cover to the floor with screws.
