email [email protected]
call 1-800-331-2032 or 905-628-4999
Warranty is conditional
WLM Electronic Panel
Battery Box
Thumb Screws (Keep Tight)
Sensitivity Knob for
cascading water
Please note: this is not an on/off switch. The water is the switch.
Signal LED
Test Button
Buzzer
Thumb Screws (Keep Tight)
To test entire system:
Make sure sensitivity dial is turned fully clockwise.
For the Water Tape, hold the center pin on the probe against the stud on
the back of the axle; touch the probe body against the screw on the frame at the same time. For the Skinny Dipper, touch the last probe
weight and the probe body with metal material (wire) at the same time.The buzzer will sound if the system is okay.
Unique hanger and tape protector supports the meter on the casing and protects the tape from sharp edges on the well casing.
IMPORTANT:
ENSURE THAT THE PANEL RETAINING THUMB SCREWS (NUTS) ARE TIGHT BEFORE USE
.
Operating and Maintenance Instructions inside
HERON ALSO MANUFACTURES:
• Water Level Meters
• Data Loggers
• Interface Meters
• Conductivity Meters
• Temperature Meters
• Well Casing Indicators
• Well Depth Indicators
HERON INSTRUMENTS INC.
447 Moxley Road | Dundas, ON Canada L9H 5E2
1-800-331-2032 | [email protected]
