Heron Elite SCANIMATION, User Manual, Page: 5 / 35

03
INSTRUCTIONS
1.Plug in the included
adaptor into the socket
and to the DC jack
located at the back to the
Scanimation® lamp
2.The lamp has 2 modes
for the display. Mode 1
is having the display run
while the top lamp is
on. Mode 2 is having the
display stay still while the
top lamp is on. Press the
on/off button once while
the lamp is off to turn on
the lamp on and activate
Mode 1. Press the on/off
button the second time
turn on Mode 2. Press the
third time to turn the lamp
off.
3. Hold the on/off button
when the lamp is on
during any mode to adjust
brightness. Brightness
cycles continuously.
4 .Please use with confidence, it is normal for
the motor to have sounds while running.