HERO SPLENDOR i Smart, Manual, Page: 14 / 76

Initial Activation of the i3s system :
2. Use choke during cold conditions.
Driving with i3s Switch in “ON” position :
Keep the i3s switch (1) to “OFF” position.
Turn the ignition key to “ON” position. the i3s
indicator (2) will glow on the speedometer
console for 2 seconds and turn “OFF”. Start
the engine and let it idle for 2-3 minutes.
Keep the i3s switch (1) to “ON” position.
Turn the Ignition key to “ON” position. The
i3s indicator (2) on the speedometer
console will glow for 2 seconds and turn
“OFF”. Start the vehicle and allow the
engine to run in neutral gear position with
the r/min less than 2000 r/min. The engine
will cut off in 30 secs. After the first stop
start every subsequent stop will be in 5 secs.
In this condition, the engine can be
restarted either with kick or electric start
only.
NOTE
While driving, if the engine is kept idling
(while waiting in a traffic signal ), the engine
will cut off in 5 secs. (The vehicle should be
in neutral at less then 2000 r/min with clutch
i3s (IDLE STOP START SYSTEM)
Starting & Warm up the engine:
1. The engine will stall if the i3s switch is
in “ON” position during warmup.
11
lever/throttle is in released position) By
pressing the clutch lever, the engine will
start again and gear can be engaged to move
the vehicle.
Driving with i3s Switch in “OFF” position :
While driving in a traffic jam/or very dense
traffic where the vehicle has to encounter a
(2) i3s indicator
2
(1) i3s switch
1