22
6.
Tyres -
check condition and pressure
(page 20-21)
8.
Drive chain -
check condition and
slackness (page 40-42). Adjust and
lubricate if necessary.
10.
L a m p a n d h o r n -
c h e c k t h a t
headlamp, tail/stop lamp, turn signal,
lamps and horn function properly.
12.
Air suction valve -
make sure all tube
connections are secured properly
(page- 54).
5.
Front brake (Disc type) -
check for
correct brake fluid level in the master
cylinder (page 43-45).
7.
Clutch -
check for smooth operation.
Adjust free play (page 38-39).
9.
Throttle -
check for smooth opening
and closing in all steering positions
(page 36).
11.
Rear view mirror -
ensure that the rear
view mirror gives a good rear view
when you are sitting on the motorcycle.
15.
Steering -
check for smooth action and
for easy maneuverability.
13.
Fitting & fasteners -
check & tighten
if necessary.
14.
Battery -
check voltage (page 46-48).
1.
Engine oil level -
check and top up
engine oil if required (page-18-19).
Check for leaks.
2.
P ro g r a m m e d F I M a l f u n c t i o n
Indicator Lamp -
when the ignition
switch is turned "ON" the Programmed FI
Malfunction Indicator Lamp glows for a
few seconds and then it should go "OFF".
3.
Fuel level
- ensure sufficient fuel is
available in the fuel tank for your journey
(page 13
-
14, 17). Check for leaks.
4.
Front and
rear brakes (Drum type) -
check operation. Adjust free play if
necessary (page 42-43, 45-46).
-
