HERO ECO DELUXE, User Manual

Page: 18 / 34

1-12
Cylinder, inner surface of cylinder sleeve
Tappet hole cap threaded portion
Crankshaft inner surface of connecting rod small end
Piston pin hole ring groove, sliding area
Piston pin outer surface
Piston ring whole surface
Valve inlet/exhaust outer surface of stem, stem end
Cam chain whole surface
Cam chain guide roller inner surface
Rocker arm inner surface of boss, slipper surface
Tensioner push rod inside
Oil pump inside of rotor
Clutch outer tooth flank, rotating area
Friction disc whole surface
Clutch lever rotating area
Primary drive gear tooth flank
Transmission gear rotating and sliding area, tooth flank, groove of shift fork
Mainshaft rotating and sliding area, tooth flank
Countershaft rotating and sliding area
Shift drum outer surface, sliding area
Kick spindle rotating and sliding area
Other rotating and sliding portion applicable area
Oil seal lip area
Ball/needle bearing rolling contact area
O-ring whole surface
Crankshaft component needle bearing of connecting rod big end
Crankshaft hole cap threaded portion
Timing hole cap threaded portion
LOCATION MATERIAL REMARKS
Each bearing (1ml min.)
Camshaft whole cam surface
M2, M4 gear inner surface all around
C1, C3 gear inner surface all around
C1 gear bush inner surface and outer surface all around
Bolt washer 6x16 for tightening of drum threaded portion
Flange bolt for tightening of rachet guide plate threaded portion
Crankshaft tapered area
ACG flywheel tapered area
LUBRICATION & SEAL POINTS
ENGINE
NOTE
Engine oil for applying will be Hero 4T Plus, GRADE:SAE 10W 30 SJ Grade (JASO MA) engine oil without molybdenum.
1
Mixture of engine oil
and molybdenum
grease in ratio of 1:1
TB# 1322N or
# 648 or equiv.
TB# 2415 or DL-200
or equiv.
Engine oil with M S
O 2
Degreasing
Engine oil
GENERAL INFORMATION