Herni
• Page 6 •
1. ADJUST THE DAMPING BRACKET
1.1 Place the rear-facing child seat in the direction
of travel on a vehicle seat approved for use.
1.2 Hold the adjustment handle (14) with one hand
on the damping bracket (10) and at the same time
pull the damping bracket (10) upwards with your
other hand until it is unlocked.
1.3 Adjust the angle of the damping bracket (10) to
the seat angle of your vehicle seat backrest so that
the damping bracket (10) engages with a "click"
sound
2. PREPARE THE ISOFIX
2.1 Pull on the gray loop (15) until the ISOFIX
locking arms (16) are fully extended.
2.2 Press the green safety button (06) and the red
release button (05) against each other on both
sides of the seat. This ensures that both hooks of
the ISOFIX locking arms (16) are open and ready for
use.
3. ATTACH THE ISOFIX
3.1 Position the two ISOFIX locking arms (16)
directly in front of the two insertion guides (02).
3.2 Slide both ISOFIX locking arms (16) into the
insertion guides (02) until the ISOFIX locking arms
(16) click into place on both sides with a "click"
sound.
DANGER!
The green safety button (06) must be
visible on both sides so that the child seat is
properly secured.
II. Safety instructions & Installation in the car
