3
Installation Steps
3
Install the O ring to the bottom of the
faucet, then put the threaded pipe on
the red inlet hose and connect it to the
faucet.
1
2
Please flush the water pipe for at least 2
minutes before installation to avoid
impurities interference, and supply hot
and cold water from angle valve.
Connect the red inlet hose
②
into the
main body of the faucet
①
by following
the hot and cold mark and tighten it.
4
Connect the blue inlet hose
②
to the
faucet body
①
and tighten it. then
tighten the thread pipe
④
to the bottom
of the faucet.
5
Connect the inlet hose
②
and the
threaded pipe
④
to the tap through the
mounting hole, adjust the direction of
the tap. Put the Gasket
⑤
(a is up, b is
down) onto the threaded pipe and
install the plastic nut on the thread tube
④
by tightening it, to keep the faucet
fixed and avoid rotation.
6
Connect the inlet hose
②
to the angle
valve(note: the red hose connects to the
hot water angle valve, while blue to the
cold) by tightening them. Turn on the
angle valve, check the connections of
inlet hose
②
, the angle valve and the
main body of the faucet
①
for leakage,
Finishing the installation.
①
②
②
②
②
③
④
⑤
⑥
Hot
Cold
