HermanMiller for Healthcare
Assembly Instructions
4
1BJM4F rev D
The front surface of a door should be flush with any adjacent doors and
drawer fronts. Also the gap between the door and the sides of the cabinet
should have a uniform gap. Turn screw clockwise to move door closer to side
panels. Counter-clockwise to move door farther away from side panels.
If Door Bumpers are not engaged to Cabinet Panels, use a Phillips screw drive
to adjust the yoke in or out so they do. Yoke position adjustable 5.5mm back
and forward.
To adjust door in/out:
Magnetic Latch Adjustment
Screw
Disassembly and Recycling:
Materials Identification and Segregation:
Where possible, plastic components are marked with ASTM recycling
codes. Use these codes to identify material type for recycling. Non marked
components should be treated as mixed plastic. Ferrous metals can be
identified using a small magnet for recycling. Non-ferrous metals should be
separated and recycled separately.
To disassemble product, reverse the above installation steps.
