Agile Wall
Assembly Instructions
1BVDJ2 rev A
8
Step 6: User power installation
6.1 If user power will be installed the lower tile on the side
that will get user power will have a pre-cut opening to allow the
installation of the power assembly.
6.2 Install the user power support bracket to the horizontal rail of
the Agile wall frame using two machine screws..
6.3 Fix the tiles.
7N
m or S+1/2
3
6.5 AC cable routing from TV power strip down through rails and
across to outlet.
6.4 Install the Lower(Bachmann) power option.
5N
m or S+1/2
2
Disassembly for Recycling:
Materials Identification and Segregation:
Where possible, plastic components are marked with ASTM recycling
codes. Use these codes to identify material type for recycling. Non marked
components should be treated as mixed plastic. Ferrous metals can be
identified using a small magnet for recycling. Non-ferrous metals
should be separated and recycled separately. To disassemble product,
reverse the above installation steps
