Z
© 2013 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
®
Y
,
Z
, Action Office and Vivo are among the registered trademarks of Herman Miller, Inc.
TM
Sense, Setu, Tu, Traverse and Sayl are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b6z0s rev C.
4
3-Way, 4-Way 90 Degree Foot:
B
E
C
B
B
E
E
C
C
A
D
D
D
E
3-Way (shown), 4-Way 90 Degree:
Place Foot(A) under frames. Place Angle
Brackets(B) on top of bottom rail of frames. Insert Hex Head Machine Screws(C)
from bottom up thru frames. Install Hex Nuts(E) onto Screws. Insert Hex Head
Cap Screws(D) thru frames. Install Hex Nuts(E) onto Screws. Torque screws to
200 in-lbs.
Frame
Bottom Rail
Disassembly for Recycling:
Materials Identification and Segregation:
Where possible, plastic components are marked with ASTM recycling codes.
Use these codes to identify material type for recycling. Non marked components
should be treated as mixed plastic. Ferrous metals can be identified using a
small magnet for recycling. Non-ferrous metals should be separated and recycled
separately.
To disassemble product, reverse steps according to foot and frame.
