Z
© 2013 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
®
Y
,
Z
, Action Office and Vivo are among the registered trademarks of Herman Miller, Inc.
TM
Sense, Setu, Tu, Traverse and Sayl are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1b6z0s rev C.
2
End-Of Frame:
Place Foot(A) under frame. Place Angle Bracket(B) on top of
bottom rail of frame. Insert Hex Head Machine Screws(C) from bottom up thru
frame. Install Hex Nuts(E) onto Screws. Align Foot Cover with End Trim before
Tightening. Torque screws to 200 in-lbs.
Frame to Frame:
Place Foot(A) under frames. Place Angle Brackets(B) on top
of bottom rail of frames. Insert Hex Head Machine Screws(C) from bottom up
thru frames. Install Hex Nuts(E) onto Screws. Install Frame to Frame Connector
Kit FT128. See instruction sheet 1B2GLX for details.
End-Of-Frame Foot
Shared, Frame to Frame Foot:
B
B
E
E
C
C
A
A
B
Frame
Frame
Bottom Rail
Foot Cover
End Trim
Bottom Rail
Frame to Frame
Connector Kit
Assembly Instructions:
