HermanMiller Aeron, Manual

Page: 5 / 8

3. krok
V
ýš ka podru č ek # - kole č ka na konstrukci podru č ek
! ! !
4 5
Arm Height
Lever on base of arm support
To raise or lower arm:
While seated, lift
lever to unlock. Grasp base of arm support
and raise or lower to desired height. Lower
lever to lock.
Adjust height of each chair arm so your arms
are supported. This helps take weight off your
shoulders.
Arm Angle
End of each arm
To swing arms in or out:
While seated, grasp
end of chair arm and move it left or right.
Adjusting arm angle can help support
different types of work and shifts in posture.
Swing chair arms inward for support while
keyboarding. Swing arm out to support use
of computer mouse.
Forward Tilt
Front lever on left side
To position chair forward:
Lean back and pull
lever all the way up. Lean forward.
To resume horizontal position: While seated,
push lever all the way down. Lean back.
Normally, forward tilt position is used
with increased chair height. This relaxes
the bend of your waist, knees, and ankles.
To support back, set tilt limiter after
assuming forward position.
Tilt Limiter
Rear lever on left side
To limit tilt range:
Recline as far as you like.
Move lever up to define limit of recline. You
can still move forward. Readjust as necessary.
To release tilt limiter:
Lean forward, press
lever down.
If you want to sit in an upright position,
set the tilt limiter when the seat is in a
horizontal or forward position.
Zv ýš ení / sní ž ení
pravé podru č ky ! - vsed ě odklopte pá č ku sm ě rem nahoru, aby do š lo k uvoln ě ní
! ! ! podru č ky
! ! ! - zvy š te nebo sni ž te podru č ku v rozmezí stopy na rámu op ě ráku
! ! ! - zaklopte pá č ku sm ě rem dol ů
Zv ýš ení / sní ž ení
levé podru č ky ! - vsed ě odklopte pá č ku sm ě rem dol ů , aby do š lo k uvoln ě ní podru č ky
! ! ! - zvy š te nebo sni ž te podru č ku v rozmezí stopy na rámu op ě ráku
! ! ! - zaklopte pá č ku sm ě rem dol ů
! ! ! Ruce by m ě ly spo č ívat na podru č kách, aby nebyla jejich vahou
& & & zat ěž ována ramena.
4. krok
Úhel podru
č ek # - konce podru č ek
! ! !
4 5
Arm Height
Lever on base of arm support
To raise or lower arm: While seated, lift
lever to unlock. Grasp base of arm support
and raise or lower to desired height. Lower
lever to lock.
Adjust height of each chair arm so your arms
are supported. This helps take weight off your
shoulders.
Arm Angle
End of each arm
To swing arms in or out: While seated, grasp
end of chair arm and move it left or right.
Adjusting arm angle can help support
different types of work and shifts in posture.
Swing chair arms inward for support while
keyboarding. Swing arm out to support use
of computer mouse.
Forward Tilt
Front lever on left side
To position chair forward: Lean back and pull
lever all the way up. Lean forward.
To resume horizontal position: While seated,
push lever all the way down. Lean back.
Normally, forward tilt position is used
with increased chair height. This relaxes
the bend of your waist, knees, and ankles.
To support back, set tilt limiter after
assuming forward position.
Tilt Limiter
Rear lever on left side
To limit tilt range: Recline as far as you like.
Move lever up to define limit of recline. You
can still move forward. Readjust as necessary.
To release tilt limiter: Lean forward, press
lever down.
If you want to sit in an upright position,
set the tilt limiter when the seat is in a
horizontal or forward position.
Vyto č ení podru č ek
dovnit ř / ven ! ! - vsed ě uchopte konec podru č ky a vyto č te ji vpravo nebo vlevo
! ! !
! ! ! Nastavení úhlu podru č ek umo žň uje lep š í podporu podle typu
& & & vykonávané práce. Podru č ky mohou b ý t nastaveny samostatn ě
& & & nezávisle na sob ě . P ř i práci s klávesnicí doporu č ujeme podru č ky
& & & p ř iklopit k t ě lu, p ř i práci s my š í naopak od t ě la.
Návod k pou ž ití
!
Aeron® Chairs