HermanMiller
Aeron
®
Chair
Adjustment Guide
2
To move armpads forward and back:
Grasp front end of the armpad and slide
forward or back.
Arm Depth:
Front of each armpad
To engage:
While seated, turn knob forward until
for you.
To disengage:
While seated, turn knob backward.
Set PostureFit SL with tilt limiter engaged in forward position to achieve the
your back in the pocket of the chair back. Then adjust PostureFit SL so that it
comfortably supports the natural alignment of your spine and provides lower
back comfort.
PostureFit SL™ Adjustment:
To change height:
Using equal pressure on each end of
the lumbar support, raise or lower it
to desired position within adjustment
track.
Adjust pad height so that it comfortably supports the natural curve of
your spine.
Lumbar Height:
Adjustable strap on back of chair
To position chair forward:
Lean back and rotate knob forward.
To resume horizontal position:
While seated, lean back and rotate
lever back all the way.
Engage forward tilt to support the thighs’ declined posture when performing
intensive tasks such as keyboarding.
Forward Tilt:
To limit tilt range:
Rotate knob forward to limit recline to
preferred position.
To release tilt limiter:
Rotate knob all the way back.
Engage the tilt limiter when you want to sit in an upright or partially
reclined position.
Tilt Limiter:
To change height:
While holding base with one
hand, grasp and turn footrest
counterclockwise.
Raise or lower to desired height
using both hands.
Turn footrest clockwise to fully
tighten into lock position.
Your feet should sit comfortably on the footrest with knees at or just below
hip height. When you adjust the seat height, the footrest moves so you don’t
have to worry about readjusting.
Footrest Height:
Circular support below seat
Only available on some models.
