Z
© 2015 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
Part no. 1BF6T1 rev D.
TM
Y
,
L
, Exclave are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
3
1. Put Arm Filler piece (D) into spider arm with pan head screw (AA).
2. Insert Draw Rod Assembly (C) into Spider (B).
3. Attach spider to Work Surface (A) with 4 socket button
fl
ange head
screws (E).
4. Insert power pass through part (D) into slot on column (F).
5. Place column (F) over tie rod and into spider as shown. Make sure
notches in column engage over ribs in spider.
E
A
EXTD.T042
C
B
B
D
AA
F
F
D
#2 Phillips Bit
Small Allen Wrench
Level
Tools Needed:
Power Driver
Torque Wrench
M12 Socket
8mm Metric Hex Bit
3mm Metric Hex Bit
6mm Metric Hex Bit
