Z
© 2015 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
Part no. 1BF6T1 rev D.
TM
Y
,
L
, Exclave are among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
15
29. To install Umbilical Riser (Y1430.WFCG or Y1430.WFSG) to table (if
available):
- Determine proper location for riser.
- Using Mounting Bracket as template, mark screw hole locations Drill pilot
holes.
- Remove screw from riser.
- Position riser to bracket. Re-install screw.
- Attach mounting bracket to work surface with 2 supplied screws.
- Run wires and cabling through riser. Secure to work surface with cable
clamps as described in step 28.
Supplied
Screw
Umbilical Riser
Screw
Mark and Drill
Pilot Holes
Mounting
Bracket