HERKULES OFC5 Owner'S Manual Download Page 2

Table of Contents

Warnings

…………………………………………………………………………………………………………………. 2

Model Information (List of models with descriptions and data)

……………………………………………… 3

Installation

……………………………………………………………………………………………………………….. 4

Inspection

………………………………………………………………………………………………………………… 5

Operation

………………………………………………………………………………………………………………… 5

Cleaning

………………………………………………………………………………………………………………. 6

Maintenance

………………………………………………………………………………………………………… 7

Repair

…………………………………………………………………………………………………………………….. 7

Drawings with part lists:

……………………………………………………………………………………………. 7-8

Warning Symbol

Caution Symbol

 

 

FAILURE TO HEED THE FOLLOWING WARNINGS MAY RESULT

IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.

1

Herkules will not be held responsible for any personal injury and/or property damage caused 
due to owner/operator failure to follow the warnings and cautions listed in this manual. 

2

Read and understand all warnings, cautions and instructions before operating  this equipment.  

     

3

It is the owner/operator's responsibility to maintain the legibility of all warning and instruction labels.

     

4

Do not alter or modify any part of this equipment. 

5

Do not attempt to bypass the door/latch interlock system. The door interlock is provided for operator safety. 

6

DO NOT open the door while the unit is operating. Always wait for the crusher to cycle completely.

7

Crush only intended matter for the crusher.

8

Always wear safety glasses when operating the crusher.
    

9

Always wear suitable industrial gloves when handling crushed objects to prevent injury.

10

Check equipment regularly for proper operation and repair or replace worn or damaged parts immediately.

11

Any crusher that appears to be  damaged in any way, is badly worn or operates abnormally shall be removed 
from use until repairs are made. Use only manufacturer's approved accessories and service parts.
Contact a factory authorized service center for repairs.
     

12

DO NOT REMOVE THIS LABEL. REPLACE IF DAMAGED.

CAUTION

WARNING

This symbol alerts you to the possibility of 
serious injury or death if you do not follow 
the instructions.

This symbol alerts you to the possibility of 
damage to or destruction of equipment if you 
do not follow the instructions.

WARNING

Page 2 of 8

Summary of Contents for OFC5









Reviews: