HERKULES K900S, Owner'S Manual

Page: 14 / 16

1. Layout the components of the 15244 KIT around the lift.
3. Position one side of the wing brackets over the appropriate lift blocks (see fig. 1).
4. Bolt the wing brackets to the lift as shown in fig. 1.
5. Slide the two tubes (#15247) into position on each side of the wing.
6. Slide the other wing into the tubes and line the mounting bracket over the lift blocks as shown in fig. 1.
8. Bolt the second set of wing brackets to the lift as shown in fig. 1.
9. Replace the old maximum capacity sticker with the new sticker. A stationary lift has 5000 lb. lifting capacity
after the 15244 KIT is installed.
10. Attach two ramps (10148) to each wing assembly (see fig. 1).
Installation of Suspension Kit
Wing 15244 Kit
(P/N 15245)
Tube
Assembly
(P/N 15247)
Flat Washer
(P/N 009-125)
Hex Bolt
(P/N 1006319)
Ramp
Assembly
(P/N 10148)
Hex Nut
(P/N 1000241)
Flat Washer
(P/N 15260)
Page 14 of 16