HERKULES G415, Owner'S Manual

Page: 7 / 20

Installing the Gun Washer
1) Place gun washer on a level surface in a properly
ventilated paint mixing room or paint booth.
Grounding the Gun Washer
1) Connect the ground wire on the gun washer’s pump to a
true earth ground.
2) Ground all equipment used or located in the gun washer
area.
Connecting the Air Line
1) Install a 1/4 in. npt male coupler (that is compatible with
the quick disconnect of your air supply line) into the air
supply port of the filter/regulator located on the right
leg.
2)
Installation
Connect air line with 90-120 psi to the coupler.
Do not change the setting of the
filter/regulator. Doing so could damage the
filter/regulator or pump.
CAUTION
Air Inlet
Fitting
Fig. 1
Q.D. Coupler
(Not Included)
Page 7 of 20