Installation
1.
Indice
x2
2.
Handle Screw
x2
3.
Lever Handle
x2
4.
Spline Adapter
x2
5.
Valve
x2
6.
Tap Body
x2
7.
Plinth
x3
8.
Rubber ‘O’ Ring
x3
9.
Rubber Washer
x3
10.
Backnut
x2
11.
Locking Pin
x2
12.
Anti-Splash
x2
1. Identify all components are present prior to starting installation.
2. Ensure that the rubber ‘O’ ring (8) is fitted to the underside of the plinth (7); slide onto the
threaded tail and install the taps to the basin.
3. Using the washer (9) and backnut (10) secure the taps to the basin by tightening the backnut on
the underside of the basin. A suitable spanner may be required to fully tighten the backnut (10)
and secure the tap into the desired position.
4. Connect the hot and cold water supplies to the taps.
5. Turn on the water supplies and open both taps letting the water flow for a few minutes to
check all joints and connections for any leaks.
04
1
2
3
4
5
6
7
8
9
10
12
11
www.divapor.com
