Before starting any installation project please consider the following:
•
Prior to drilling into walls, check there are no hidden electrical wires or cables or water supply
pipes with the aid of an electrical detector.
•
If you use power tools do not forget:
- Wear eye protection.
- Unplug equipment after use.
•
This product must not be modified in any way as this will invalidate the guarantee.
•
These fittings need to be installed in accordance with and meet the requirements of the Water
Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
Safety Note
•
Please read these instructions & retain for future use. All products manufactured & supplied
by Heritage are safe, provided they are installed correctly, used correctly, and receive regular
maintenance in accordance with these instructions.
•
If you are in any doubt about your ability to install this product safely you must employ
the services of an experienced, qualified plumber.
02
General Specifications
Operating pressure range (bar)
Min
Max
Basin Taps
0.2
5.0
Bath Taps
0.2
5.0
Maximum static pressure – 10.0 bar
NOTE:-
Nominally equal (balanced) inlet supply pressures are recommended for optimum
Performance of mixer taps.
Designed to comply with BS EN 200 for single taps / combination taps for water systems of type 1 and
2 general technical specifications; and to be used within systems designed to BS 6700.
BS 6700 recommends the temperature of stored water should never exceed 65°C. A stored water
temperature of 60°C is considered sufficient to meet all nominal requirements and will minimise
the build up of lime scale in hard water areas.
www.divapor.com
