6
I N S TA L L AT I O N - WA L L H U N G M I R R O R E D
D O O R U N I T S
Safety Notice- All Wall Hung Units must be installed with adequate load bearing screws
(not supplied) and used with the supplied wall hung brackets and plates.
Caversham Double Door Mirror Wall Unit & Caversham Single Door Mirror Wall Unit
The units shown in these instructions are for illustration purposes only. All products in this range can be
fitted using the guide.
The mirrored door on the single door unit will need to be fitted depending on preferred orientation. Please
see Page 9 for information on how to fit. See page 15 for hinge adjustment.
Single shelf supplied with 3 possible positions.
Mirrored door wall units are supplied with hanging brackets pre-fitted to the unit.
Determine favoured position of
unit. Mark a vertical centre point
on the wall. Measure the span of
the pre-fitted brackets and transfer
measurement to wall from centre
point to give a central position for the
cabinet.
Fit the wall plates to the wall using appropriate fixings (not
supplied) using a long spirit level to make sure levelling is
accurate. Plates should be no more wide apart than the
spanned measurement of the wall hanging brackets.
Hang cabinet in position on wall plates.
Wall
Fixing Centres
Length
Measurements to consider
Summary of Contents for Caversham KCHFM400
Page 16: ...16 N O T E S...
