11
I N S TA L L AT I O N - WA L L H U N G U N I T
Our cloakroom wall hung unit comes pre-fitted with hanging brackets. The unit should be fitted to
the wall using the supplied brackets and wall plates.
We also give you the option to fit the door left or right-handed. See page 9 for information on fitting
door hinges.
Hang cabinet on wall plates and adjust the
fitted brackets if needed for the position
required. Lock and tighten the unit onto
the brackets.
Refer to your basin/worktop instructions
to complete the installation.
Single shelf supplied with 3 possible positions.
Determine favoured position of unit,
remembering to take into account
any additional height for your basin/
worktop. Mark a vertical centre point
on the wall. Measure the span of
the pre-fitted brackets and transfer
measurement to wall from centre
point to give a central position for the
cabinet.
Fixing Centres
Length
Measurements to consider
Fit the wall plates to the wall using
appropriate fixings (not supplied)
using a long spirit level to make sure
levelling is accurate. Plates should be
no more wide apart than the spanned
measurement of the wall hanging
brackets.
Summary of Contents for Caversham KCHFM400
Page 16: ...16 N O T E S...
