Installation Manual
4
Module Installation
For trouble-free operation, follow these simple installation guidelines:
Electrical wiring used to connect the MicroZone modules
must meet all state and local
regulatory requirements
. Wire rated for 600 volts (minimum) is recommended.
Standard electrical conduit or raceways can be used to route wiring for the MicroZone
modules.
Do not install the modules in the same room where the animals live. A separate room or
hallway is a preferred location.
Do not install the modules where they will be subjected to harsh chemicals.
When fastening the covers to the units, be sure to only compress gaskets to ½ their original
size. This will result in a better seal to repel any moisture or dirt that may get into the units
and prevent normal operation.
Wiring/Setup
Below is a simplified diagram to show how the MicroZone units interconnect for a 120V
installation. A wiring diagram for 240V installation is on the next page. A qualified electrician can
easily wire the system with standard (600V-rated) wire.
