Installation and Operation Manual
HL-10C Installation Manual Rev 2.0
3
Part Number MAN-000015
Description
The HouseLink HL-10C provides a CAN bus interface to the CAN bus controller.
The HouseLink HL-10C is designed
to be used with the BinTrac Bin Weighing system. One HouseLink HL-10C can be
connected to one BinTrac indicator and can connect with a maximum of four bins.
Installation
1. The HouseLink HL-10C should be mounted no more than 10 feet from the CAN bus controller.
2. Using a two-conductor cable (ordered separately), connect the GREEN wire from the Smart Summing Box to the
+COM terminal in the HouseLink HL-10C and the White wire from the Smart Summing Box to the -COM terminal
in the HouseLink HL-10C.
3. Connect the HouseLink HL-10C to the CAN bus controller by connecting the
CAN (HI)
to the
CAN (HI)
terminal
and the
CAN (LO)
to
CAN (LO)
terminal of the CAN bus controller.
4. Finally, connect the
24V (+)
from the HouseLink HL-10C to the
24V (+)
of the CAN bus controller and the
24V (-)
from the HouseLink HL-10C to the
24V (-)
of the CAN bus controller.
Table 1
HL-10C Interface
BinTrac Indicator
(BINS Port)
+COM (OUT)
+ SIG (GREEN wire)
-COM (OUT)
- SIG (WHITE wire)
HL-10C Interface
CAN Bus Controller
CAN (HI)
CAN (HI)
CAN (LO)
CAN (LO)
24V (+)
24V (+)
24V (-)
24V (-)
Figure 1
