21
21/03/2019 Rev.2 (04/12/2019)
1
2
3
E
4-Place the legrest vertically in front of the bed, see photo F, and then place the legrest on the two locking pins located on the base,
see photo G. This should be done very easily, if you have adjusted the bed as asked before to the black sticker level. Photos H and I
show in detail how to insert the legrest in the locking pins.
F
G
3-Pull out the 2 locking pins located on both side of the frame, see E and rotate them a quarter turn clockwise to lock in place, see
photos (1+2+3)
.
Remove the mobile base from the slats bedframe and place it on the floor (4).
Distributør i Norge:
Gymo AS - www.gymo.no
(+47) 4000 3522 - [email protected]
