Hercules HD94B Owner'S Manual & Safety Instructions Download Page 5

Page 5

For technical questions, please call 1-888-866-5797.

Item 56564 
        

Grounding

TO PREVENT ELECTRIC SHOCK AND 
DEATH FROM INCORRECT GROUNDING: 
Check with a qualified electrician if you 
are in doubt as to whether the outlet is 

properly grounded.  Do not modify the power cord 
plug provided with the charger.  Do not use the 
charger if the power cord or plug is damaged.  
If damaged, have it repaired by a service facility 
before use.  If the plug will not fit the outlet, 
have a proper outlet installed by a 
qualified electrician.

Extension Cords

Extension cords must not be used 
with this item’s Charger.

Warning Symbols and Definitions

 

This is the safety alert symbol.  It is used to 

alert you to potential personal injury hazards.  

Obey all safety messages that follow this symbol to 
avoid possible injury or death.

Indicates a hazardous 
situation which, if not 

avoided, will result in death or serious injury.

Indicates a hazardous 
situation which, if not 

avoided, could result in death or serious injury.

Indicates a hazardous 
situation which, if not 

avoided, could result in minor or moderate injury.

Addresses practices not 
related to personal injury.

Symbology

V

Volts

Direct Current

A

Amperes

n0 xxxx/min.

No Load Revolutions 
per Minute (RPM)

WARNING marking concerning Risk 
of Eye Injury.  Wear ANSI-approved 
safety goggles with side shields.

Read the manual before 
set-up and/or use.

WARNING marking concerning 
Risk of Hearing Loss.  
Wear hearing protection.
WARNING marking 
concerning Risk of Fire.  
Do not cover Charger 
ventilation ducts.
Charge on fireproof surface only.
WARNING marking concerning 
Risk of Explosion.  
Do not puncture, short, or open 
battery packs and do not charge 
damaged battery packs.
WARNING marking concerning 
Risk of Electric Shock.
Properly connect Charger’s power 
cord to appropriate outlet.

SPECIFICATIONS

Battery Type

Hercules 12V Li-Ion 
(sold separately)

No Load Speed

0 – 400 / 0 –1500 RPM

Chuck Size

1/4"

Summary of Contents for HD94B













Reviews: