VINYL
This button lets you enable/disable SCRATCH mode (to
be used in conjunction with the jog wheels).
MODE
In conjunction with the pads, these buttons let you select
the pads’ mode
(HOTCUE/ROLL/SLICER/SAMPLER),
independently on each deck.
The secondary modes (TONEPLAY/FX/SLICER
LOOP/BEATJUMP) can be accessed with a long press of
½ second (0.5 seconds) on the corresponding button: the
button will flash to indicate that the secondary mode is
enabled.
PLAY/PAUSE BUTTON
Play
or
pause
the track on the corresponding deck (deck
1 or 2).
CUE BUTTON
- If a track
is NOT being played, insert a Cue point
at
the current position of the
PLAYHEAD
.
- If a track
IS being played
, the
playhead
goes to the
last Cue point used
and
stops playback of the track.
-
Press and hold down the CUE button
to
start
playback of the track; when you
release
the button, the
track
returns to the Cue point.
- Press the
CUE button and the PLAY/PAUSE button
to do a
CUE-PLAY
(CUP).
-
SHIFT + CUE
= return to the
start of the track.
SYNC BUTTON
- Press the
SYNC
button to
synchronize the deck’s
BPM
with the Master Tempo.
- Press
SHIFT + SYNC
to force the current deck as the
Master Tempo.
LOOP
- Enable/disable a loop by selecting the in point (
IN
) and
the out point (
OUT
) for the loop. If you press and hold the
LOOP IN
button for ½ second, an automatic loop (4
beats long) is launched.
At any time, you can divide by 2 or multiply by 2 the
length of the active loop by simultaneously pressing
SHIFT + LOOP IN (divide by 2)
or
SHIFT + LOOP OUT
(multiply by 2).
SLIP
Enable/disable Slip mode. Allows you to play the track in
the background in order to maintain its phrasing during a
scratching phase, for example.
QUANTIZE
Enable/disable Quantize mode. Allows you to start
actions on the next beat (play, Cue point).
TEMPO
A TEMPO fader lets you manually adjust the playback
speed of a track (BPM), in order to synchronize two
different tracks. The green LED to the right of the fader
indicates that the track is being played at its original
tempo (TEMPO fader in the center).
BEATMATCH GUIDES (4 red arrows per deck)
TEMPO visual guides:
indicate that you need to either
slow down or speed up the track (i.e. raise or lower the
TEMPO fader).
BEAT ALIGN visual guides:
indicate in which direction
you need to turn the jog wheel in order to align the
beatgrids of both tracks.
EFFECTS RACK CONTROL
Enable/disable effect 1. Modulate the effect using the
dedicated FX potentiometer, and adjust the amount of
the effect using the Dry/Wet potentiometer. You can
select the effect via
SHIFT + ON
.
