manualshive.com logo in svg

Hercules Cargo 1000, Operating Instructions Manual, Page: 92 / 228

Share
Download
Hercules Cargo 1000 Operating Instructions Manual Download Page 92

Before the fist ride

034-11572_1.0_29.08.2018

90

Figure 45:

Brake lever grip distance

6.3.2.1

Adjusting the grip distance on a Magura brake lever

(Alternative version)

Use a T25 TORX® wrench to turn the setting screw to 
adjust the grip distance. 

Turn the setting screw in the minus (-) direction.

The brake lever moves closer to the handlebar grip.

Turn the setting screw in the plus (+) direction.

The brake lever moves away from the handlebar 
grip.

The brake lever grip distance can be adjusted to 
ensure that it can be reached more easily. Contact 
your specialist dealer if the brake handle is too far from 
the handlebars or is hard to use.

EN_034-11572_1.0_09.18_HERCULES BOSCH_Inhalt.book  Page 90  Wednesday, August 29, 2018  6:21 PM

Summary of Contents for Cargo 1000





































































































































































































































Reviews:

No comments