Page 10
For technical questions, please call 1-888-866-5797.
Item 56435
General Operation
TO PREVENT SERIOUS INJURY: Grip
the tool firmly in both hands.
1. Make sure that the Slide Switch is not
locked on, then plug in the tool.
2. Push the Slide Switch forward to start the tool. For
continuous operation depress the front of the Switch
to lock in the ON position. To turn tool OFF, depress
the rear of the Switch and slide it backward.
3. Allow the tool to come up to full speed
before touching the work material.
For grinding or sanding operations,
apply the
wheel or disc to the work material at a 10°–
15°
angle, allowing the tool to operate at full speed.
If the tool bogs down, use lighter pressure.
To create a smoother surface, keep the
tool moving over the work surface.
For abrasive cutting-off operations,
apply the cut-off wheel straight into the work
material using only the edge of the wheel,
allowing the tool to operate at full speed. If
the tool bogs down, use lighter pressure.
WARNING: Do not grind with the side of
the cut-off wheel.
Abrasive cut-off wheels are
intended for peripheral grinding; side forces applied
to these wheels may cause them to shatter.
NOTICE:
TO PREVENT TOOL DAMAGE:
Only use the tool for 15-20 minutes at a time.
Allow the tool to cool completely before next use.
4. When finished, pull the Slide Switch
backward to stop the tool.
5.
TO PREVENT ACCIDENTS, AFTER USE:
Turn off the tool.
WARNING! Allow the tool to come to a complete
stop before setting it down.
Unplug the tool. Clean, then store the
tool indoors out of children’s reach.
