MY21H02 - 12_1.0_19.10.2020
58
Operation
6.14
On-board computer
The control panel on the handlebars uses four
buttons to control the on-board computer.
Figure 47: Overview of control panel
1
On-Off button (control panel)
2
Function button
3
Up button
4
Down button
6.14.1 Switching the on-board computer on
1
Press and hold the
On-Off button (control
panel)
for about 2 seconds.
The electric drive system is switched on.
A prompt will appear asking you to enter the
PIN.
Figure 48: Overview of control panel
2
Press the
function button
briefly.
3
Press the
up button
or
down button
briefly to
enter
the PIN.
4
Press the
function button
briefly.
The <Home screen> appears.
If the PIN is incorrect, enter PIN again. If the
correct PIN is not entered, the on-board
computer will switch off after 60 seconds.
6.14.2 Switching off the on-board
computer
If the system is not used for 10 minutes, the on-
board computer will switch off automatically.
Press and hold the
On-Off button (control
panel)
for about 2 seconds to switch the on-
board computer off.
6.14.3 Using the riding light
To switch on the
riding light
, the drive system
needs to be switched on first.
Press the
up button
for a long time
(> 1 second).
The headlight is now switched on. The
backlight switches from daytime to night mode.
The riding light symbol is activated.
The interface daytime and night modes are
displayed as follows:
Press the
up button
for a long time
(> 1 second).
The headlight is switched off. The backlight
switches from night to daytime mode. The
riding light symbol is deactivated.
Notice
Never use the on-board computer as a handle.
The on-board computer may become
irreparably damaged if you use it to lift the
pedelec.
1
2
3
4
1
The initial PIN is 0000.
