MY21H02 - 12_1.0_19.10.2020
35
Assembly
Experience has shown that a pedelec which has
not yet been sold is automatically handed to
customers as soon as it appears ready to ride.
Complete an assembly report for quality
assurance.
The assembly report (see Section
11.2
)
describes all safety-relevant inspections, tests
and maintenance tasks for the pedelec in a
separate list. All assembly work must be
completed to ensure the pedelec is ready to
ride.
5.4
Preparing the battery
5.4.1
Checking the battery
The battery must be checked before it is charged
for the first time.
1
Press the
On-Off button (battery)
.
If none of the LEDs on the battery level
indicator light up, the battery may be damaged.
The battery may be fully charged if at least one,
but not all, of the LEDs on the battery level
indicator is lit up.
5.4.2
Retrofitting the battery locking lever
The battery locking lever can be retrofitted to
SuperCore or UltraCore batteries if they do not
have one.
5.4.2.1
Preparing the frame
1
Cut out the drilling template in Section 11.4
along the blue dotted line.
Figure 24: Cutting out along the blue line
2
Fold drilling template along green dotted line.
Figure 25: Folding along the green line (line 1)
3
Place and position drilling template on frame.
4
Stick drilling template to frame.
5
Make hole mark.
6
Pre-drill hole 3.3 mm in diameter (M4).
7
Cut M4 thread.
