A Phillips head N0. 2 screwdriver is the
only tool required to assemble Hercke
®
Series 7even
®
products. Depending on
your installation requirements, other tools
that may be helpful include a level, power
drill and drill bits.
1
Assemble all platforms. Place platform in
the desired location. Level each platform
and make sure all platforms are level
together.
2
Assemble Overhead Storage Cases.
Select overhead cabinet placement.
Attach case using Wall Mount System or
Channel Mount System.
4
Fasten Single and Double E-Clips to
adjoin cases and drawer modules.
5
Snap door hinges to case hinge plates
and adjust door positions.
6
Attach work surface.
Chaos Defeated. Order Restored.
7
Pull platform out allowing yourself room to
get behind the platform. Assemble cases.
Stack cases and drawers on platforms in
a single stack. Add Single E-Clips to the
backside of cases and drawers. Slide the
stack back into their final level position.
3
Please read this brief overview before assembling your Hercke Series 7even system. What follows
is an outline of the order in which your assembly process needs to occur.
Assembly Instructions Overview
