General information
11
Motor data for X/ X-C model
Design
IM B5/V1
Motor connection
Manufacturer-specific
Protection type
IP 55
Speed
1500 (1800) rpm
Frequency
50 (60) Hz
Connection ≤ 2.2 (2.6) kW
230
5
/ 400
3
(460
3
) V
Connection ≥ 3.0 (3.6) kW
400
5
/ 690
3
(460
5
) V
Insulation class EN 60034-1 F (155°C)
Motor data for X-PM model
Design
IM B5/V1
Motor connection
Manufacturer-specific
Protection type
IP 55
Speed
1500 rpm
Connection
3
300 - 400 V
Insulation class EN 60034-1 F (155°C)
Customised solutions may differ from this standard data.
1.4.6 Dimensions, weights, performance data
The measurements, installation dimensions and weight
details can be found in section 5.2 Dimensions. The order
documents and the name plate data specify the performance
and connection data of the respective pump model.
The performance verification of the pumps is performed ac-
cording to DIN EN ISO 9906 (Rotodynamic pumps - Hydraulic
performance acceptance tests), Class 2.
1.4.7 General data
Media temperature range for:
lower limit temperature: - 5 °C
upper limit temperature: + 60 °C
Caution!
In herborner.X-C pump models,
pumped media < 15 °C und > 40 °C
damage the motor.
Connect another cooling circuit to the
motor.
Ambient temperature range for:
lower limit temperature: - 5 °C
upper limit temperature: + 40 °C
Density and viscosity of the pumped medium:
Density:
max. 1000 kg/m
3
Kinematic viscosity:
max. 1 mm
2
/s (1 cST)
Customised solutions may differ from this standard data.
Power correction:
Reduce the power according to the specifications of the mo-
tor manufacturer if motors are used at ambient temperatures
> 40 °C or at altitudes > 1000 m above sea level. To do this,
please contact the pump manufacturer.
A differing density or viscosity alters the hydraulic perform-
ance of the pump. Observe the motor performance during
this.
Sound pressure level:
The sound pressure level dB(A) of the pump during cavi-
tation-free operation lies within the range of Q
optimal
, and is
below the limit values specified in EC Directive 2006/42/
EC for machines. You can find further information about the
sound pressure level for the various motor models in section
5.3 Technical specifications.
Summary of Contents for herborner.X
Page 4: ......
