EN
–
Translation of the original user manual - 1.4 | 2021
19
Live log
This log will immediately show changes when the installation is in use and there is
a connection to the unit.
HMD log
This tab gives you a number of options for reading information from the HMD con-
trol. It concerns the following options:
System log
This log will display the last 255 events that are stored in the HMD.
Event log
This log will immediately display any current errors in the installation.
Serial number
The serial number of the built-in controller is displayed.
Version
The installed software will be displayed.
Parameter
The parameter table that is in use will be displayed.
CONFIGURE INPUTS AND ALERTS
The order of the inputs is always pre-configured by Heras and cannot be adjusted
by a user. A filter time has been determined for each input. This filter time blocks
the status change during that time. A status in the status field on the right will only
