2+4 Pin Pushlock Type Connector
You must use Push Lock Type 2 + 4 Pin
Female Plug Cap for the last product of line
MOLELINE SERIES
Installation Guide
R
Connection
The two products should be 2mm at least
.
•
All installation procedures, including installation of the products, should be carried out by authorized technicians.
•
Installation of product areas should be avoided in with constant fluid flow.
•
Installation ground should be avoided on soft soil, clay, sand etc.
•
Isolate cable and cable connectors.
•
Do not engage in installation applications other than the installation method specified in the manual.
•
Do not use on surfaces without forming the infrastructure of electrical and data cables.
•
Do not drill any extra mounting holes in any area of the product.
•
Do not block the water discharge channels in the products, be careful during installation.
