x
MOLELINE SERIES
Installation Guide
R
1 pcs.
Moleline
®Series
1 pcs.
Moleline
®Series Holder
1 pcs.
Allen Key
Packing Contents
• Mains power must be switched off before installing products.
• The connection, installation, commissioning and assembly operations of the products
must be performed by qualified technicians.
• Do not install wet, deformed or defective products and equipments,
do not provide power, please contact the nearest technical service.
• Install the products only in accordance with the connection patterns specified
in the relevant Specificiation Sheet.
• Do not open or attempt to repair the products and connection equipments.
• Do not open extra holes on products for mounting and protect products from impacts.
• Do not install the products except as described below.
• Different installation of products may cause products to malfunction or hazardous conditions.
• Use recommended mounting equipments for products.
• This product is not suitable for indoor use. Electric shock may pose a risk of fire or combustion.
• Please follow the steps below when installing the products
.
Installation
1
Installation Guide
Ground Construction
•
All installation procedures, including installation of the products, should be carried out by authorized technicians.
•
Installation of products in areas with constant fluid flow should be avoided.
•
Do not engage in installation applications other than the installation method specified in the manual.
•
Do not block the water drain channels in the products. Be careful during assembly.
•
When creating the product holder well, consider the environmental infrastructure.
•
Moleline Series is suitable for inground use when the conditions specified in the manual are created.
•
Do not build Holder well on infrastructure like electricity, water, natural gas.
