background image

5067634_00_01

2

Weiteres Zubehör auf www.hepco-becker.de / More accessories see www.hepco-becker.de

HEPCO&BECKER GmbH | An der Steinmauer 6 | 66955 Pirmasens | Germany | Tel. +49 6331 1453100 | Fax: +49 6331 1453 120 | Mail: [email protected]

Achtung / Attention: 

Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren! Abgebaute Teile wieder montieren.

Bitte beachten Sie unsere beigefügten Serviceinformationen.
Control all screw connections after the assembling for tightness! Reassemble the dismantled parts. Please notice 

our enclosed service information.

1

Montage des Tankrings:

In die nun freien Bohrungen die Alu-
distanzen Ø8,4xØ5,3x10 stellen und 
den Tankring mit den Linsenschrauben 
befestigen:
     M5x45 vorne hinten links
     M5x20 vorne links+ hinten rechts

Die vier vorderen Schrauben der originalen Befestigung entfernen, diese entfallen. 
Remove the four front screws of the original mounting, these are omitted.

Fastening of the tank ring:

Insert the alu spacers Ø8,4xØ5,3x10 
in the now free holes and fix the tank 
ring with the filister head screws:
     M5x45 front right+ rear left
     M5x20 front left+ rear right

Montageanleitung / Installation Instruction

Wichtig / Important:

Wenn Sie sich nicht sicher sind,wie man eine bestimmte Arbeit ausführt, sollten Sie diese Ihrer Fachwerkstatt überlassen. 

Ziehen sie alle zugänglichen Schrauben zuerst nur locker an. Nachdem alles montiert ist, werden die Schrauben dann 

auf das entsprechende Anzugsmoment festgezogen. Dadurch wird sichergestellt, dass das Produkt spannungsfrei  

angebaut ist. Anzugsmomente beachten! Nach der Montage alle Verschraubungen auf festen Sitz kontrollieren!

If you are not sure how to execute a determined action, you should ask your local distributor to do it. First, tighten all 

screws only loosely. After mounting all parts, the screws should be tightened to the torque specified. This guarantees, that 

the product is mounted without tension. Observe the tightening torques of the manufacturer! Control all screw connections 

after the assembling for tightness!

2x

2x

4x

Vorbereitende Maßnahmen / Preparatory actions

Reviews: