ASSEMBLING YOUR VACUUM
I INSERT THE HEPA DUST BAG
Important: Do not
use the vacuum without all filters, cloth dust bag, and with or without
the HEPA dust bag in place.
1. Close the power with switch and remove the flexible hose.
2. To open the canister lid press on the canister lid tabs on each side of the unit and lift
canister lid. (Fig.1)
3. Pull the tab on the patented HEPA dust bag holder out slightly and flip upwards.(Fig 2)
4. Holding the HEPA dust bag in your hand, slice it firmly between the slots in the bag
holder. (Fig 2)
5. The cardboard face of the new bag should rest securely in the dust bag cover
guide.(Fig 3)
6. Ensure that the cloth bag is in place. (Fig. 4)
7. Flip the
patented HEPA bag holder over, pressing the tab on the bag holder until it
clicks then replace the canister lid.
8. The canister lid can be replaced on the unit with the hose opening on the right or left,
as per your preference. (Fig 5)
Operating Instructions
