manualshive.com logo in svg

HEPA GV 8 quart, Operation Instruction Manual

Share
Download
HEPA GV 8 quart Operation Instruction Manual Download Page 12

                                                                             

SPECIFICATIONS AND PARTS

 

Charger Specification:

 

Charger input: 120V 50/60Hz AC only   

Charger output: 30V 1A

 

Battery Specification:

 

Lithium Polymer chemistry 25.2V 

Approximate charge time: 8 hours

 

Approximate run time for new battery: 30 minutes. 

 

 

 

 

 

 

 

 

 

. Battery pack      2. Charger   

 

OPERATION

 

                               

  Charge in a well ventilated area. DO NOT block charger 

                               vents. Keep them clear to allow proper ventilation. 

 

CHARGING LITHIUM POLYMER BATTERY PACKS

 

Lithium Polymer batteries deliver fade-free power for their entire run time. The GV vacuum 

will not gradually lose power due to decreasing battery charge. The vacuum will perform at 

its normal performance level until the battery has been depleted. Once this happens, 

recharging of the battery is required. It is not necessary to drain the battery pack 

completely before recharging.

 

If the charger’s light is not lit at any point during the charging process, remove the battery 

pack from the charger to avoid damaging the product. DO NOT insert another battery. 

Contact the service with any issues.

 

 

 

Summary of Contents for GV 8 quart















Reviews:

No comments

Brands by name

Popular brands

Load more brands