HENX NUMBERAS-GZJ20, Operator'S Manual

Page: 18 / 49

elsewhere in this manual.
◾
Check the blade and motor mounting bolts at frequent intervals
for proper tightness.Also,visually inspect blade for
damage(e.g.,bent, cracked,and worn).Replace the blade only with
a blade from HENX.
◾
Replace the blade if it is bent or cracked.An unbalanced blade
causes vibration that could damage the motor drive unit or cause
personal injury.
◾
If the equipment should start to vibrate abnormally,stop the motor
and check immediately for the cause.Vibration is generally a
warning of trouble.
◾
Never allow children to operate the hedge trimmer.
◾
The trimmer shall be used to cut stems less than10 mm thick.
◾
Trim only in daylight or in good artificial light.
◾
Follow instructions for lubricating and sharpening.
◾
Keep handles dry,clean and free from oil and grease.
ADDITIONAL WARNINGS
◾
Do not charge the battery pack in rain or in wet locations.
◾
Use only with the battery packs and chargers listed below:
BATTERY CHARGER
A40B25B01
，
A40B50B01
，
A40B75B01
A40K250
，
A40MC75B01
◾
Thebatterypackmustberemovedfromtheappliancebeforeitisscrapped.
◾
The battery shall be disposed of safely.
◾
Do not dispose of the battery in a fire. The cells may explode.Check
with local codes for possible special disposal instructions.