HENX A36GC16B01 Operator'S Manual Download Page 3

Page: 3 / 35

Safety Alert

Indicates a potential personal injury hazard.

Eye Protection

Always wear safety goggles or safety glasses with side shields and a
full face shield when operating this product.

Read Operator’s Manual

To reduce the risk of injury, user must read and understand operator’s

manual before using this product.

Maintain Safety Devices

Do not open or remove safety shields while the tool is running.

Look Behind While
Backing

Look down and behind first to avoid tripping when pulling back.

DANGER

—

Keep Hands

and Feet Away

To reduce the risk of injury, keep hands and feet away from rotating
parts. Do not operate unless discharge cover or grass bag is in its
proper place. If damaged, replace immediately.

DANGER

—

Keep

Bystanders Away

Do not mow when children or others are nearby.

DANGER

—

Steep Slope

Hazard

Use extra caution on slopes. Do not mow slopes greater than 15
degrees.

Beware of sharp blades

Blades continue to rotate after the motor is switched off-Remove
disabling device before maintenance.

Summary of Contents for A36GC16B01




































Search results

Summary of Contents for A36GC16B01

Reviews:

Related manuals for A36GC16B01

Brands by name

Popular brands

HENX A36GC16B01, Operator'S Manual

Search results

Summary of Contents for A36GC16B01

Reviews:

Related manuals for A36GC16B01

Brands by name

Popular brands