background image

Model MP-941/942/943/944 

 
 

 

 

 

 

 

 

 

 

 

1-5.  SAFETY 

The only way to ensure safe operation of the Henny 
Penny Multipurpose Holding Cabinet is to fully 
understand the proper installation, operation and 
maintenance procedures.  The instructions in this 
manual have been prepared to aid you in learning the 
proper procedures.  Where information is of particular 
importance or is safety related, the words NOTICE, 
CAUTION, or WARNING are used.  Their usage is 
described below: 

 
 

SAFETY ALERT SYMBOL is used with 
DANGER, WARNING, or CAUTION which 
indicates a personal injury type hazard. 

 
 

 

   

 

NOTICE is used to highlight especially important  

  

 

information. 
 

   
 
 
   

 

CAUTION used without the safety alert symbol  

   

 

indicates a potentially hazardous situation which, if  

   

 

not avoided, may result in property damage.

  

 

 
   

 

 

 

   

 

 

 

   

 

 

CAUTION used with the safety alert symbol  

   

 

 

indicates a potentially hazardous situation which,  

   

 

 

if not avoided, may result in minor or moderate  

 

 

  injury.

 

 
 
 
 

WARNING indicates a potentially hazardous  

 

situation which, if not avoided, could result in  

 

death or serious injury.

 

 
 
 
 
 
 
 
 
 
 
1-2                                                 

   

 

 

 

 

 

 

 

    203

 

Summary of Contents for MP-941



















Reviews: