Henny Penny ECS-605, Operating Manual, Page: 25 / 74

Operation
Electric Space$aver ™
25
Space$aver ™
Rethermalization Mode
This mode is used to reheat meals on plates or dishes, or cooked
foods in pans or on grids, without any loss of quality. This mode has
a special pre-set air circulation setting.
Setting the temperature
Press the “On/Off” button.
Press the “Retherm” button and the display shows “248°F
(120°C)
and “0:00”.
Turn the CombiDial to confirm.
Temperature range: 86°F - 356°F (30°C -180°C).
Setting the time
Select the time by turning the CombiDial.
Time can be set from 1 min - 9 hours 59 min.
Continuous mode
:
With time set to “0:00”, turn the CombiDial to
the left and hold for 3 seconds ‹ the time display changes to “---” for
Continuous Run.
Probe Temperature Setting
Press the CombiDial twice after setting the retherm
temperature
to set the probe temperature. Turn the CombiDial to
desired temperature and then press it to confirm the probe
temperature.
Note: If a cooking time is entered before entering the final core
temperature, the control system will ignore this, as the core
temperature always takes priority.
Using Retherm mode
After setting the temperature and timer, or probe temperature, press
the “Start/Stop” button. (The unit can be heated by pressing the
Ready2Cook button.) The display now shows the
selected cooking
temperature, along with the time or probe setting.
.
It also displays
the actual cooking time, and the actual probe temperature if in
Continuous Run .
The temperature display shows the remaining cycle time (in
continuous mode “---” ) or the actual core temperature.
Displaying actual
temperatures
To display the actual cooking temperature, press and hold the
Cooking Temperature button.
Changing the setting
Time, temperature and probe temperature can be changed during a
cooking cycle by pressing the selection function using the
CombiDial to make changes.
End of Retherm mode
After the moist heat time is over and the probe temperature is
reached, a buzzer sounds
1
and the interior lights flashes
, indicating
t
hat the cycle is over. Pressing the “Start/Stop” button before
opening the door cancels the program.
248°F 0:00
Regenerating
Additional
function
Hom
---
Additional
function
Home
248°F
176°F 212°F
Additional
function
Home
212°F 1:20
1:18
212°F 176°F
158°F
1.The duration of the sound and flashing is adjustable.
see Page . .
Press the CombiDial twice after setting the setpoint core temperature
and set the steam quantity. The steam quantity can be set from 0-
100% in 10% steps with the CombiDial. Humidity Control