Henny Penny 500 Technical Manual Download

Page: 38 / 236

Model

500/561/600

2-12. GAS BURNER

ASSEMBLY
(GAS MODELS)

The gas model fryer has a gas burner assembly consisting of a
burner casting, ori

ces, thermocouple, pilot holder, and main

gas control valve.

Description

Safety Precautions

If converting from natural gas to propane gas or from propane
gas to natural gas, conversion must

be done by a quali

service technician.

TO AVOID PERSONAL INJURY OR PROPERTY
DAMAGE, BEFORE STARTING THIS PROCEDURE,
MOVE THE MAIN POWER

SWITCH TO THE OFF

POSITION. DISCONNECT THE MAIN CIRCUIT

BREAKERS AT THE CIRCUIT BREAKER BOX OR
UNPLUG SERVICE CORD FROM WALL RECEPTA-
CLE. TURN OFF THE MAIN GAS SUPPLY TO THE
FRYER AND DISCONNECT AND CAP THE MAIN
SUPPLY LINE TO FRYER, OR POSSIBLE EXPLO-
SION COULD RESULT.

1. Remove the control panel per paragraph 2-4.

2. Place the control panel back in upright position, in the

metal

anges.

2-18

103

MAIN GAS
CONTROL VALVE

PILOT
HOLDER

THERMOCOUPLE

ORIFICE

BURNER
CASTING

Summary of Contents for 500













































































































































































































































Search results

Summary of Contents for 500

Reviews:

Related manuals for 500

Brands by name

Popular brands

Henny Penny 500, Technical Manual

Search results

Summary of Contents for 500

Reviews:

Related manuals for 500

Brands by name

Popular brands