Keen Ovens
Model K-50
Specifications
Electrode Capacity
50lbs. 18" rods
Volts (Specifiy)
120V or 240V AC/DC
Current Draw
1.25 amps
Watts
150W
Thermostat
Factory Preset/Field Adjustable
Temperature
Preset 275ºF : Range 100ºF-300ºF
Insulation
1"
Interior Dimensions
6" X 6 X 19" H
Net Weight
20lbs.
Shipping Weight
21lbs.
Shipping Dimensions
10.5" X 9" X 22.75"
Safety Precautions
Read all instructions completely before attempting to operate this unit.
*** SAVE THESE SAFETY INSTRUCTIONS ***
To reduce the risk of electrical shock, fire, or personal injury follow the guidelines below:
•
Before connecting unit to a power source, be sure the voltage supplied is the same as that specified on the name plate
of the unit.
•
Check outlet to ensure proper grounding of the electrical cable. Have a licensed electrician check the A/C power
outlet if you are not sure.
•
Use this unit for its intended purpose as described by literature.
•
Make sure power cord is located so that it will not be stepped on, tripped over, or otherwise subjected to stress of heat,
oil, or sharp edges. Do not close doors on the cord.
•
To reduce the risk of damage to the electric plug and cord, disconnect by plug rather than by the cord.
•
Do not use this unit if cord or plug is in poor condition. If it has been exposed to weather or immersed in water, have a
qualified serviceman inspect and replace parts as necessary.
•
WARNING! NEVER HANDLE PLUG, CORD, OR UNIT WITH WET HANDS OR WHILE STANDING IN
WATER.
•
Use special care when moving heavily loaded units.
•
Do not store combustible material on or around the unit.
